Guía de registros de pruebas de embalaje

Q: What should a packaging test record include?

Record the purpose and failure mode, sample identity and revision, method, equipment, conditioning, load or exposure, sequence, observations, measurements, photographs, deviations, result, decision owner, and any corrective action or retest.

Q: Which packaging tests are universal?

There is no universal test panel. Select tests from the product, packaging structure, materials, surface, application, handling, environment, transport, destination, and contractual or regulatory requirements.

Q: Does a test record prove certification?

No. A test record describes one method and result for an identified sample. Certification or regulatory status requires the applicable authority, scope, current document, product and material identity, and any required review.

Q: When should packaging be tested?

Test when the result can change the design or release decision: during structure development, on a representative sample, after material or artwork changes, before production release, and after a relevant process or packing change.

Selección de pruebas

“Tested” is incomplete without a method, sample, and decision.

Packaging can be exposed to opening cycles, friction, moisture, oils, temperature, stacking, vibration, compression, drops, handling, or a product-specific chemical environment. Select the test from the failure that matters to the product and route—not from a generic list of claims.

Boundary: this guide defines what to record. It does not set a universal pass/fail limit, create a certification, choose an ASTM or ISO method, or claim that any GloryStarPack project has passed a test without its project record.

1 · Map the failure mode

Start with the decision the test needs to support.

The same packaging can need different tests when the product, surface, climate, application, route, or customer expectation changes.

Desplazarse horizontalmente para ver todas las columnas →

Example test families and the records that make the result usable.
Test family	Failure to define	Record at minimum	Release question
Fit and closure	Product movement, lid separation, drawer friction, insert collapse, or opening failure.	Product and packaging revision, dimensions, cycles, method, observations, force or gap where relevant, and photos.	Does the pack protect and open as intended?
Rub and appearance	Scuffing, print transfer, coating change, foil loss, or unacceptable surface marking.	Surface, contact material, load, stroke or cycles, conditions, rating method, photos, and reference sample.	Does the customer-facing appearance remain acceptable?
Adhesion and exposure	Label lift, edge curl, ink change, adhesive transfer, water or oil damage.	Substrate, adhesive, exposure, dwell, temperature, preparation, application method, observations, and images.	Does the applied pack survive its stated use?
Handling and transit	Crush, drop, vibration, abrasion, carton failure, or product damage in the intended route.	Pack-out, product mass, carton identity, stacking or handling sequence, equipment, conditions, damage map, and decision.	Is the tested pack-out suitable for the defined route?
Information and scanning	Unreadable code, missing copy, color mismatch, or artwork revision error.	Approved artwork, device or viewing condition, code identity, lighting, distance, result, and retained proof.	Can the required information be read and reconciled?

Shipping cartons reviewed for pack-out and transit test records

2 · Build the record

Retain enough detail for another qualified person to reproduce the decision.

Identify the sampleProduct, packaging configuration, material, artwork, revision, lot or sample ID, quantity, and whether the sample represents production.
State the methodNamed method or internal procedure, equipment, settings, sequence, preparation, conditioning, operator, and deviations.
Capture the actual resultMeasurements, observations, cycle count, exposure, photos, defect location, failure mode, and the condition after the test.
Record the decisionPass, fail, conditional, more evidence required, redesign, retest, or another defined disposition with an owner and date.
Link the correctionWhen the result changes the material, artwork, structure, packing, or method, create a new revision and identify the retest trigger.

Usar el e-commerce mailer transit guide for a route-specific example, and the waterproof label testing guide for exposure planning.

3 · Place the test in the workflow

Test before the next irreversible decision.

A test that happens after artwork release, bulk conversion, or shipment may document a problem without preventing it.

01
Define the intended use
Describe the product, user, application, exposure, handling, storage, transport, destination, and failure consequence.
02
Choose a representative sample
Match the material build, finish, adhesive, insert, closure, product mass, artwork, and pack-out to the decision being made.
03
Approve the method and limits
Name the current method, conditions, sample count, measurements, rating, acceptance criteria, and decision owner before testing.
04
Record and review
Keep the full observation record, photos, deviations, failures, correction, and re-test status with the sample revision.

Preguntas del comprador

Packaging test records FAQ.

Project-specific methods and acceptance limits must be selected by the qualified owner for the application.

What should a packaging test record include?

Which packaging tests are universal?

Does a test record prove certification?

When should packaging be tested?

Guía de registros de pruebas de embalaje.

“Tested” is incomplete without a method, sample, and decision.

Start with the decision the test needs to support.

Retain enough detail for another qualified person to reproduce the decision.

Test before the next irreversible decision.

Define the intended use

Choose a representative sample

Approve the method and limits

Record and review

Packaging test records FAQ.

Tell us what the pack must survive and how it will be judged.